Knowledge

1. The oil separator core is clogged When the oil separator core is clogged, it will cause excessive current in the air compressor motor. It is also possible that the oil separator core will deform du

Screw air compressors (hereinafter referred to as screw machines) have a series of unique advantages such as simple structure, reliable operation and convenient operation, and thus are widely used in

1. The cabinet has good ventilation. 2. Regularly check for leakage, spillage, dripping and seepage. In most systems, a leakage rate of 10% to 25% of compressed air is typical. The leakage of compress

1. Abnormal loading and unloading of the unit; Abnormal start and stop; Abnormal exhaust pressure, etc. It usually belongs to the fault of the control system. 2. Oil leakage or shortage of oil in the

1. Air filter, filtration accuracy ≤20-30μm. If the air filter is clogged, it will cause the compression ratio and temperature to rise simultaneously, and the performance will be reduced. The ai

The condensate water pipes should be independently connected to the drainage ditches. 2. A filter should be installed on the cooling water inlet pipe. When it comes to cooling water, attention should

1. Don't assume that just because the machine stops, maintenance and repair work can be carried out. The automatic control system of the machine can start the compressor at any time. 2. Poor maint

1. Cut off the power supply of the main unit and hang a sign at the power switch. 2. Close the stop valve leading to the gas supply system to prevent compressed air from flowing back to the part under

The cooling and lubrication system, oil-gas separation system, and air volume regulation system of a screw air compressor are the key systems to ensure the normal operation of the unit. The probabilit

Analysis of the causes of Pressure Detection System failures and Troubleshooting methods

The loading solenoid valve is a two-position three-position normally closed solenoid valve. The loading and unloading functions are achieved by controlling the on and off states of the gas circuit thr

The principle of the screw air compressor operation control system is to achieve fully automatic operation through pressure monitoring and valve linkage. The core is divided into three stages: