1. The cabinet has good ventilation.
2. Regularly check for leakage, spillage, dripping and seepage. In most systems, a leakage rate of 10% to 25% of compressed air is typical. The leakage of compressed air requires the unit to constantly load to meet the pressure requirements, which will consume more electricity. The leakage of the oil system will accelerate the loss of oil and increase the cost of replenishing oil. Therefore, it is necessary to regularly inspect the leakage of the compressed air pipeline network and check whether there is any leakage in the oil circuit. To reduce production costs.
3. Regularly add grease to the motor. E. Regularly measure the current and voltage. A 1% imbalance in three-phase voltage can cause the current of a certain phase to exceed 10%. A 3.5% imbalance in three-phase voltage will increase the motor temperature rise by 25℃. Therefore, the current and voltage should be checked regularly. When wiring the motor, it is absolutely forbidden to connect it in reverse; otherwise, the oil injection screw will reverse, causing damage to the bearings and the screw to be seized.
4. The surface of the motor should be cleaned. Dust and insect debris should be removed from the outer cover of the motor fan blades and the motor heat sink.
Air compressor equipment should undergo regular maintenance work every 4,000 hours and 8,000 hours.