Nowadays, when shopping, people are afraid of buying counterfeit goods, especially air compressor oil. Inferior air compressor oil not only wastes resources but also has a certain impact on the use of air compressors! When we are using air compressor oil, without relevant testing equipment, how can we determine the authenticity of the oil? Is it true that the more expensive it is, the more genuine it is? Actually, that's not the case. We can also test the air compressor oil through our own methods. Let's take a look together!
1) Lubrication performance: The quality of the lubrication performance of air compressor oil is related to its viscosity. Generally speaking, when it is said that there is no viscosity or the viscosity has decreased, it refers to the deterioration of the lubricating performance of the air compressor oil. After the lubricating performance of the air compressor oil has declined. In this way, an oil film with sufficient strength cannot be formed, and the adhesion or stickiness will also deteriorate accordingly. Thus, it cannot play a good lubricating role. To test the performance of air compressor oil: Rub your thumb and index finger, which are dipped in air compressor oil, against each other. If there is a sticky feeling, It can be determined that this type of air compressor oil also has good lubricating performance. If there is a rough feeling, it can be determined that this air compressor oil has lost its due lubricating performance.
2) Moisture: Fill the air compressor oil into a test tube. If it appears turbid, observe its transparency. If it is not clear and transparent. This can initially determine whether the air compressor oil contains water. To determine whether the oil actually contains water or not, there are two reliable methods:
1. Put anhydrous steel sulfate (red powder) into a test tube filled with air compressor oil. This can also prove that there is water in the oil. These two methods cannot provide the amount of water contained, such as copper sulfate changing from white to blue. It can only be estimated based on experience according to the amount of bubbles that emerge from the air compressor oil during the heating process and the amount of copper sulfate added.
2. Pour the oil to be inspected into the test tube. Heat it over an alcohol lamp. If bubbles appear, the oil volume should be two-thirds of the test tube's capacity. After sealing the mouth of the test tube with a cork and wax. If a "pop" sound is heard simultaneously and water droplets condense on the wall of the test tube above the oil surface, it indicates that there is water in the oil
3) Viscosity: The air compressor oil that has been tested and meets the quality standards is placed in a test tube. Leave about 5 millimeters of space in height. Put the air compressor oil to be inspected into another test tube, seal it with a cork and wax, and do not fill it up. The specification of the test tube used and the amount of oil it holds should be the same as the previous one. It should also be sealed with a cork and wax. At the same time, both test tubes should be turned upside down to observe the rising speed of the bubbles. If the bubbles rise faster than those in the standard air compressor oil, it indicates that the viscosity of this oil is relatively low. Conversely, the viscosity is relatively high.
4) Impurities: Fill the air compressor oil into the test tube. Observe whether there are any suspended granular impurities.
The above is the detection method for air compressor oil. You can also first conduct a simple test on your air compressor oil to see if it is genuine!




