How to deal with the slow pumping of screw air compressor? The slow pumping power of screw air compressor is generally low for the following reasons:
1. The host is faulty. Check the gas supply power of the main engine of the equipment, close the valve after the air storage tank to the air storage tank, from the display loading to unloading, record the time, can be calculated according to the volume of the air storage tank and the gas production on the name plate of the screw air compressor, and draw a conclusion.
2. Gas consumption is increased, and gas consumption is greater than gas production. Carefully check whether there is leakage in the airway line and equipment; Whether the installation is reasonable, screw press and gas equipment can not be too far away; Check whether the new gas equipment is used. If there is no basic way to identify the screw air compressor as small, we can solve it by adding equipment at this moment.
3. Check whether the air filter is blocked. The air compressor needs to finish the air filter regularly in the process of use, and the replacement period should be properly shortened where the operating environment is not good. Check the pressure sensor of the screw air compressor, which can close the valve behind the air storage tank or cheer in the production state, whether the normal loading and unloading is in the set pressure.
4. The inlet and exhaust valves are faulty and can not be turned over completely. Check whether the inlet and exhaust valves are completely turned over and whether they need to be adjusted.
The above are the main reasons for the slow pump of screw air compressor and specific solutions.