Compressed air precision filter is used to remove pollutants in the compressed air system, such as dust, iron filings, scale and other corrosive solid particles, compressor lubricant, condensation water, acid cooling condensate, oil and hydrocarbon mist, etc. E9-24 replaces Hankison new separated filter element to provide high quality compressed air for the compressor air system to meet the application requirements.
Mengma filter professional production of various brands of air compressor filter, if you are interested, you can send me an email,My Email is yuling@mmfilter.com Or Wechatt/WhatsApp:+86 15738660740
Main components: filter element, filter shell, end cover, teeth, etc.
The material of the filter is generally selected to be the same as that of the process pipe connected. For different service conditions, cast iron, carbon steel, low alloy steel or stainless steel filters can be considered.
Fine classification of filter element of precision filter:
The 9-level main flow filter can remove a large amount of liquid and solid particles above 3μm, reaching the minimum residual oil content of only 5ppm, with a small amount of water, dust and oil mist. Used for air compressor, after the rear cooler, before other filters, for general protection; Used for pretreatment before cold drying machine.
The 7-level air line filter can remove liquid and solid particles as small as 1μm, and achieve the minimum residual oil content of only 0.5ppm, with trace moisture, dust and oil mist. Used for pretreatment before the 5 stage filter; After the cold drying machine and the suction machine, the air quality is further improved.
The five-stage ultra-efficient oil removal filter can remove liquid and solid particles as small as 0.01μm, achieving a minimum residual oil content of just 0.001ppm, with almost all water, dust and oil removed. Used for 1 stage filtration and drying machine before, to protect, after the cold dry machine, to ensure that the air does not contain oil.
The 1 level activated carbon filter can filter the oil mist and hydrocarbon as small as 0.01μm, and reach the lowest residual oil content of only 0.001ppm, without moisture, dust and oil, odorless and tasteless. Act as the last filter, for some must use high quality high quality air units, such as food industry, respiratory, aseptic packaging, etc
Filter element characteristics
Removable stainless steel mesh core separated by centrifugal force at 10 μs or
Larger solid and liquid particles can be replaced safely by fiberglass
Filter 3 μm or larger solid and liquid particles. Gravity will bring water to the bottom of the filter and discharge the remaining 5PPM oil mist
Scope of application
Remove large amounts of water and large particles
Separator for rear cooler
A separator for a freeze dryer




