Working principle of liquid ring compressor: The pump body is equipped with an appropriate amount of water as the working liquid. Due to the action of centrifugal force, the water forms a closed ring of approximately equal thickness depending on the shape of the pump chamber. The inner surface of the upper part of the water ring is just tangent to the impeller hub, and the inner surface of the lower part of the water ring is just in contact with the tip of the blade (in fact, the blade has a certain insertion depth in the water ring). At this time, a crescent shaped space is formed between the impeller hub and the water ring, and this space is divided by the impeller into several small cavities with the same number of blades. If the upper part of the impeller is 0° as the starting point, then the volume of the small cavity of the impeller increases from small to large when the impeller is 180° before rotation, and it is communicated with the suction port on the end face. At this time, the gas is inhaled, and the small cavity is isolated from the suction port when the suction ends. When the impeller continues to rotate, the small cavity is reduced from large to small, so that the gas is compressed; When the small chamber communicates with the exhaust port, the gas is discharged out of the pump.
Working principle of liquid ring compressor
Apr 14, 2025 Leave a message
Send Inquiry




