Why should Ingersoll Rand air compressor lubricating oil be replaced regularly? The engineer of Mengma filter sends out the analysis reason for you;
After lubricating oil is used for a certain time, the following factors will affect the quality of the oil, so it needs to be replaced regularly:
1) Friction surface due to wear and friction dropped metal chips.
2) Dust and other hard particles carried by the air.
3) There is no carefully clear molding sand on the casting.
4) The paint layer on the parts falls off.
5) Lubricating oil deteriorates due to water produced during cooling.
6) The temperature and other influences of lubricating oil in the cycle lubrication gradually reduce the performance of lubricating oil.
Above stuff easy to form a paste analogues in the lubricating oil, lubricating oil pollution, accelerated sharply friction abrasion on the surface of the machine, so the machine lubricating oil in use process if gradually deteriorated to the following indicators should replace the new air compressor oil, such as the lack of test equipment to check, every 2000 ~ 3000 hours, in a new oil, And carefully clean the oil feeding equipment and lubrication points.