The failure of the main oil circuit system leads to poor oil supply, the main engine can not get oil lubrication and cooling, the Yin and Yang rotor, the internal cavity and the end face form dry friction, and it is easy to generate sparks under high-speed rotation, and enter the oil and gas common pipe through the exhaust end of the main engine, and then enter the oil and gas barrel to ignite the oil. The main oil system oil supply failure occurs, the main engine is not completely oil-free state, there is a small amount of lubricating oil in the compression chamber, in the Yin and Yang rotor, compression chamber and end friction, a small amount of lubricating oil is diluted by a large amount of air in the main engine dry friction more easily become a fuel. This situation occurs in a very short time, the temperature sensor of the machine is delayed, the high temperature jump protection has not reacted in time, and the oil core has been burned. The oil supply of the main oil circuit system fails, the machine runs, the intake valve is fully open, a lot of air is inhaled in the main engine, the lack of oil lubrication and cooling during compression, and the main engine runs with sharp and harsh dry friction sound. The Mars generated by dry friction enters the oil and gas barrel, the hot air expands rapidly under the action of the open flame, burns the oil, and then the safety valve starts to smoke, and the machine automatically jumps.
Some customers have asked the following questions: The machine has high temperature protection, how can it burn the oil due to high temperature? Here is a situation that needs to be explained to you:
The principle of high temperature protection is that the temperature sensor is connected with the control computer of the machine, the temperature sensor detects the temperature of the exhaust port of the host, and monitors the temperature value transmitted by it at any time. When the set temperature value is reached (such as 120 ° C), the control line is disconnected and shut down to protect the machine from running at high temperature for a long time, and the high temperature protection system is mainly to protect the machine from high temperature caused by general factors, such as insufficient oil in the oil barrel, poor cooling effect of the cooler, and the failure of the temperature control valve makes the oil into the cooler too small. The high temperature caused by bypass can not be completely closed, and the high temperature caused by oil deterioration. However, it cannot protect the immediate shutdown due to the lack of oil entering the main engine cooling main and secondary rotors and internal cavity friction caused by the open flame.
If fire is used to burn the sensor, will high temperature protection extinguish the fire? The answer is no! The temperature sensor can only be slowly heated by the fire to transmit the temperature it feels to the computer (there is a delay in temperature sensing), so that the computer can disconnect the circuit, and the machine will be protected by high temperature. Motor power off, the host can not immediately stop running!
Troubleshooting: 1. Check whether the structure of the temperature control valve is complete. Is it working properly? Are there short connections? 2. Check whether the oil cut-off valve is in good condition. Is the voltage normal? 3. Is the oil good? Is the oil system clean?
Air filtration, liquid filtration, gas filtration, hydraulic oil filtration, petroleum filtration,
dust filtration, coalescers, separators - we can all produce!
No matter which brand - we can produce!
No matter which model - we can produce!
You have needs - please contact us.






