What is the reason why the single screw air compressor cannot be popularized on a large scale?

Jul 12, 2021 Leave a message

From the name, the air compressor is characterized by only one screw rotor.

But in fact, the single-screw air compressor has three rotating shafts, that is, there is a screw rotor and two planetary gears perpendicular to the screw rotor.

It has not been popularized on a large scale because of the following problems that are difficult to solve in industry.

(1) More moving parts.

Single screw air compressor has three rotating shafts, and the rigidity of screw and planetary gear is different greatly, and the deformation is easy to be uneven in movement, so the meshing accuracy is difficult to guarantee, so the volume efficiency is low.

In the current market sales of single screw compressor planetary gear are non-metallic materials, poor wear resistance, in the process of high speed work, due to wear and tear, resulting in the increase of internal leakage, and work for a period of time after the flow has a greater attenuation.

In addition, it is difficult to guarantee the meshing accuracy caused by the uneven deformation, which will also reduce the mechanical stability of the whole machine equipment and limit its use range.

(2) The material of planetary gear needs to be further improved.

As one of the core components of single screw air compressor, planetary gear plays a sealing role.

If the planetary gear made of steel is selected, due to the large expansion coefficient of steel and the large amount of expansion, it is necessary to leave a large gap between the planetary gear and the screw, which will not only leak more, low efficiency, but also easily bite and cause major failures.

If using composite materials, while it is possible to solve the above problems, but because of the low strength, poor wear resistance composite materials, in the process of running under the action of shear force and mechanical friction, not only will soon be damaged, causing internal leakage increase, efficiency drops, and frequent maintenance, maintenance staff labor intensity and maintenance cost.

(3) The single screw profile needs to be further optimized.

The conventional profile rotor is round and single head. The technology is mature and the production cost is low.

The new type of screw line rotor is elliptical and double-headed. The new type of line rotor is efficient, material saving, and can improve the efficiency and life of the pump, but the processing precision is high and the production cost is high.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry