The reasons for the high fuel consumption of screw air compressors

Oct 16, 2025 Leave a message

If the compressor experiences oil leakage, it will not only contaminate the post-treatment equipment such as dryers and precision filter elements, but also affect product quality and cause varying degrees of damage to certain production equipment. Therefore, it is necessary for us to master the reasons for the high fuel consumption of screw compressors and the solutions.

In oil-injected screw compressors, while compressing gas, a large amount of oil is injected into the inter-tooth volume of the compressor. The oil-gas mixture formed by these oils and the compressed gas, after undergoing the same compression process, is discharged into the oil-gas separator of the unit.

The oil-gas separator is one of the main devices in the oil-injected screw compressor unit system. In order to reduce the oil content in the exhaust of the unit and recycle the lubricating oil in the unit, it is necessary to use an oil-gas separator to effectively separate the lubricating oil from the gas. If the oil separator malfunctions, the lubricating oil cannot be separated well and will be discharged along with the compressed air. Therefore, the failure of the oil separator and its oil separator core is the most significant factor causing the high fuel consumption of oil-injected screw compressors.

Generally speaking, the oil separator requirement for oil-injected screw air compressors is that the residual oil content in the outlet compressed air after oil separator treatment should not exceed 3ppm. Excessive oil content in the air at the compressor outlet is usually referred to as high oil consumption or oil leakage, which has long been a headache for manufacturers, sellers and users.

In addition, there are other reasons. During the actual handling process, we have found that a large proportion of the fault complaints are not caused by the quality problems of the oil separator. So, apart from the quality issue of the oil separator, what other reasons can lead to oil leakage in the oil separator?

In fact, these several situations can also lead to oil leakage:

1. Fault of the minimum pressure valve

2. Unqualified compressor lubricating oil was used

3. The design of the oil and gas separation tank is not standardized

4. Excessive refueling

5. The return oil check valve is damaged

6. Improper installation of the return oil pipe

7. Large gas consumption

8. The return oil pipeline is blocked

Send Inquiry

whatsapp

Phone

E-mail

Inquiry