(1) Run the air compressor for a little time, so that the oil temperature rises, improve the flow of oil, and facilitate the discharge;
(2) Press the stop button to stop;
(3) When the pressure of the paint barrel is lower than 0.05MPa, open the oil drain valve at the bottom of the oil and gas barrel. Due to the pressure, the oil discharge speed is very fast, easy to spray, so it should be slowly opened to avoid the oil splash. Close the drain valve after the oil is drained. Note: All lubricating oil in the system must be drained clean, including pipes, coolers, oil and gas drums, etc.
(4) Open the fuel plug and inject new oil.




