There are many manufacturers of air compressors on the market, and there are many types of air compressors produced in the same way. Only by choosing the right air compressor can we not waste resources. So how to choose their own screw air compressor model number, so as to achieve the purpose of cost saving. Here are some tips to help.
General air compressor manufacturers will write their own company's English letters into the starting model of the air compressor, and then install the volume flow rate and working pressure.
At present, some air compressors used in the market are energy-saving screw air compressor, permanent magnet frequency conversion air compressor, double-stage screw air compressor, etc., with a wide range of services and a variety of specifications and models, the air compressor itself is to save costs by compression of air, and pay more attention to energy saving, high efficiency and low noise in the process of research.
Selection of screw air compressor model:
1. When calculating, add the air consumption required by 7 cubic meters per minute of air consumption, that is, more than 7 cubic meters of air compressor, such as the 7.5m/min air compressor power of 45KW /min.
For the specific calculation of the air consumed by the factory, the air consumed by the air tools can be calculated by calling the manufacturer or reading the instruction manual. The total air consumed by all the air tools is the total air quantity. Make sure that the air consumption unit is correct.
2, air compressor should understand the volume flow parameters of gas equipment to select, and combined with the actual gas consumption for appropriate selection, is conducive to users and air compressor equipment, to avoid waste.
3, the power of the air compressor is proportional to the exhaust volume, so it is necessary to determine the working pressure, because the speed decreases, the exhaust volume is also reduced accordingly. Therefore, in the case of meeting the working pressure and volume flow rate, the choice of air compressor power can meet the power of the selected air compressor motor.
Therefore, on how to choose the appropriate screw air compressor model number, first determine the working pressure, which is a more important factor in the selection of air compressor model number, and then determine the required volume flow, and then choose the power supply capacity.