Screw air compressor daily work
Clean the water at the bottom of the oil and gas separator until the oil flow is out of date, and make sure the oil level is in the correct position.Observe the display on the control panel, check the pressure, operating temperature, the general inspection machine, the outside surface of the bolt, the cooler, whether there is leakage, etc.
Screw air compressor
1. screw air compressor operation and maintenance must be qualified personnel;
2. The air compressor is irreversible.Therefore, when starting for the first time or maintaining the electronic control system, the compressor must be confirmed to be consistent with the rotation direction of the motor before starting;
3. It must be cooled to room temperature before removing high-temperature components;
4. In the use of special oil for screw air compressor, different grades of lubricating oil cannot be mixed;
5. do not manufacture any impact that will cause unsafe conditions, air compressor changes or increase the reliability of any device;
6. The air compressor should use the recommended original parts. The recommended spare parts can ensure the safe and reliable operation of the air compressor.
7. in the use of the process shall not prevent the screw air compressor intake;
8. Do not exceed the prescribed pressure range during the operation;
9. Once the screw air compressor in Shanghai is found abnormal during operation, the operation of the air compressor shall be stopped immediately and the abnormal conditions shall be eliminated.