1. Under normal operation, the oil separator can work for about 3000 hours, but the pollution degree of the lubricating oil and the surrounding environment has a great impact on its life. If the environmental pollution is serious, you can consider installing a front air filter.
In general, whether the oil fine separation filter element is damaged can be judged by the following methods:
(1) The oil content in the air pipeline increases;
(2) The pressure difference between the front and back of the oil separator exceeds 0.12MPa;
(3) Whether the current is increased.
2. Safety matters: The replacement should be carried out after the shutdown and confirm that the system is carried out without pressure.
3. The replacement method of the external oil separator is the same as that of the oil filter.
4. Replacement method of built-in oil fine separation filter element:
(1) Disassemble the branch pipe of the upper cover of the oil and gas barrel;
(2) disassemble the fastening screws on the top cover of the oil and gas drum;
(3) Remove the top cover of the oil and gas drum;
(4) Take out the old oil-gas separation filter element and replace it with a new one;
(5) Install it in the reverse order of unpacking.
5. Note: there is an asbestos gasket above and below the flange of the oil fine separation filter, and there are metal conductive sheets such as staples on the gasket to prevent the generation of static electricity of the oil fine separation filter. Replace the original nail.
6. Note: When installing, ensure that the distance between the return pipe of the oil and gas barrel and the bottom of the oil separator is 2~3mm.
7. Note: In the process of replacing the oil fine separation filter, it is necessary to prevent unclean items from falling into the oil and gas barrel.
8. After the replacement, the machine should be turned on to check whether there is oil leakage.





