Precision filter in the air compressor is mainly used to deal with the filter particle impurities, keep the compressed air clean. However, many users do not know how to install, the following Meng Ma technical personnel to introduce in detail:
1. During installation, read the product manual first to confirm the installation position of the product; Precision oil removal filters should be equipped with appropriate filter dryer.
2. The interface of dry filter is pipe thread or flange, and its sealing performance should be kept at the joint to avoid leakage deviation caused by pinhole leakage. To maintain the vertical installation of the filter, there should be space below the filter for maintenance of the filter and automatic drainage valve.
3. Precision filters should generally be installed at the air outlet end of the air storage tank, and the compressed air temperature is close to the outside temperature.
4. In order to facilitate maintenance, there is no need to cut off the compressed air system, but the filter can be separated from the system and decompressed. If filters are not allowed in some applications. For compressed air, one more filter should be installed on the bypass line.
The above is the installation method of precision filter. The Meng Ma technicians remind you that the precision filter assumes the mission of protection in the air compressor, and the failure in the process of use should be repaired in time.
Our company produces various brands of air compressor filter elements. If you are interested, you can send me an email. My email is yuling@mmfilter.com.c