● The oil separator core is a part that separates the screw oil from the compressed air.
● Under normal operation, the service life of the oil separator is about 3000 hours, but the quality of lubricating oil and the filtration accuracy of air have a great impact on its service life.
Thus, in the harsh environment, the maintenance and replacement cycle of air filter elements must be shortened, and even the installation of pre-air filter elements.
When the current rear pressure difference exceeds 0.12mpa, the oil separator must be replaced; otherwise, the motor will be overloaded and the oil separator will break.
● Replacement method:
A) Remove the control pipe installed on the cover of the oil and gas barrel, remove the return pipe extending into the oil and gas barrel on the cover, and remove the fastening bolt on the oil and gas barrel.
B) Remove the top cover of the tank and the oil separator.
Remove asbestos pad and dirt from upper cover.
C) Install a new oil separator. Ensure that the upper and lower asbestos pads are firmly nailed, and the asbestos pads must be neatly arranged when pressed, otherwise they will cause pad blocks.
D) Install cover, return pipe and control pipe as usual, and check whether there is leakage.
