How to choose the right lubricating oil?

Aug 19, 2021 Leave a message

The method of choosing the appropriate lubricating oil is as follows:

1) From the economic point of view of users, the main purpose of choosing synthetic oil is to save money, because synthetic lubricating oil has excellent comprehensive performance compared with mineral oil.

Such as high temperature oxidation stability, low carbon residue, high flash point, low volatility, and low temperature performance and good lubrication performance, wide temperature range, etc.

With synthetic compressor oil can obviously extend the oil change period extended (8 ~ 10 times), the decrease of the filter and the replacement of the oil and gas separator, the decrease of mechanical parts such as bearings and seals replacement number, this not only reduces the cost of raw materials, and reduce the artificial expenses, special used in synthesis of ester oil, can obviously reduce the sludge, precipitation and carbon deposition.

2) from the safety factors, used to compress conveying medium such as air, chemical gas compressor, the past with mineral oil, main is to fire, explosion and other accidents occur frequently in reciprocating compressor, caused the attention of people, on the analysis of the cause of the accident, the half is because of the lubricating oil with high temperature and high pressure air contact intense oxidation occurs,

The result of coke blocking the outlet valve and outlet line.

How to solve the high exhaust temperature, inhibit the degradation of lubricant and settling problems, promoted the development of synthetic compressor oil, years of practice has proved synthetic compressor oil can satisfy the working under harsh conditions, such as high temperature, high pressure, high speed of all kinds of compressor performance requirements, and in the life of the mineral oil for a few times higher security trouble-free.

3) From the perspective of environmental protection, because of the low volatility of synthetic air compressor oil, it is a green lubricant that meets the requirements of environmental protection, so it has attracted much attention and adoption.

4) From the perspective of air compressor environment, mineral oil is easy to form carbon deposition due to its short service life, mainly because mineral oil contains more heavy components.

The best use of environmental conditions are very harsh, and the lubrication screw air compressor must be frequently replaced.

For most screw cup air compressors, if the environmental conditions are relatively moderate, hydrocarbon synthetic air compressor oil should be selected.

This is because hydrocarbon synthetic compressor oil has a smaller tendency to accumulate carbon, and the use time can be longer.

If the screw air compressor uses mineral lubricating oil, the oil needs to be changed for about 3000h, and the oil change time can be extended to 6000~8000h when the hydrocarbon synthetic air compressor lubricating oil is used.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry