How to choose screw air compressor with oil and without oil

Dec 01, 2022 Leave a message

In screw air compressor, according to the type of lubrication, it is mainly divided into oil lubrication and oil free. Literally, it is easy to understand whether you need to use air compressor lubricating oil. In fact, it is not so. So what industry is the oil lubricated air compressor used in? Under what circumstances should oil-free lubrication be considered?

First of all, the selection of lubrication mode of screw air compressor must be combined with the industry and actual working conditions. As the choice of piston machine, screw machine, centrifuge in some cases, such as food, medicine, precision instruments and other industries, it is necessary to use oil-free air compressors. Select the corresponding air compressor according to the needs of the industry.

If it is used for purging, machining, manufacturing, and power use, the air compressor with oil and micro oil can be selected. Such as spraying, steel, electric power, hardware, mining, ceramics, textile, machinery and so on are widely used.

The definition of oil and no oil in the air compressor generally refers to the oil content of the air compressor exhaust port. Generally, the oil content of the oil machine is larger, and the oil content of the oil free machine is 0.01ppm, so the oil content is used to distinguish the oil and no oil in the air compressor.

Now, screw air compressors have been selected for large displacement and oil-free air compressor models.

One is to use water instead of oil. The other is to coat the rotor with a self-lubricating coating. Because the bearings at both ends of the rotor run at high speed need oil lubrication, it is necessary to make the lubrication space of the rotor bearing and the compression space of the rotor mutually sealed. It is precisely because of this high speed seal that the oil-free air compressor needs quite high processing accuracy and pays a large cost.

Once the main engine head of oil-free air compressor fails, because it is too precise, the main engine head can only be repaired back to the manufacturer, greatly increasing the irreparable. Even if it can be repaired, it also needs to pay a huge amount of money and a great deal of maintenance time.

_20220528103726_

Send Inquiry

whatsapp

Phone

E-mail

Inquiry