The structure of the water-air separator of screw air compressor is similar to that of oil and gas tank. The inlet is designed against the wall and the solid type is centrifugal force. Because of the weight factor of water and gas, the moisture in compressed air can be separated effectively.
Cleaning of water-gas separator: remove the cover of water-gas separator and soak in cleaning agent.
Cooler cleaning is divided into air-cooled cooler and water-cooled cooler. Air-cooled cooler: open the air guide cover plate, or remove the cooling fan;
blow the dirt down with compressed air backblow, then take the dirt out of the air guide cover; if dirty, spray some oil remover and blow again. When the screw air compressor can not be cleaned by the above method, it is necessary to remove the cooler, soak or spray with cleaning liquid and clean with the help of brush.
Install cover or cooling fan.





