1. Definition:
Centrifugal compressor is a machine that produces pressure and is a kind of turbine compressor. TURBINE is the English translation of "turbine", which is a rotating impeller. Centrifugal compressors have been widely used in total low pressure air separation units, and the trend of centrifugal compressors replacing piston compressors has gradually appeared.
2. Working principle:
It is a working wheel with blades that rotates on the shaft of the compressor, The gas entering the working wheel is rotated by the blade, increasing the kinetic energy (speed) and static pressure head (pressure), and then out of the working wheel into the diffuser, in the diffuser gas speed into the pressure, further increase the pressure, the compressed gas then through the bend and reflux into the next stage of the impeller to further compress to the required pressure. For example: it is generally driven by a prime mover (motor) to drive a shaft, the shaft is equipped with four impels, just like a shaft with four fans, a fan of the wind passed to the second fan, and passed to another fan, and finally you feel the power of the wind is very big. This is how the centrifugal compressor increases the pressure of the gas through the impeller.
There are two reasons for the gas to increase the pressure in the impeller: first, under the action of the impeller blade, the gas rotates at a high speed with the impeller, and the gas increases the pressure of the gas due to the centrifugal force generated by the rotation, followed by the impeller is gradually expanded from inside to outside, and the gas diffuses the flow in the impeller to improve the pressure after the gas passes through the impeller.
3. Features:
Centrifugal compressor is a speed compressor, compared with other compressors:
Advantages:
⑴ Large exhaust volume, uniform exhaust gas, no pulse of air flow. (2) High speed. (3) No lubrication is required in the machine. (4) Good sealing effect, less leakage phenomenon. (5) Flat performance curve, wide operating range. (6) Easy to automate and scale. With less wearing parts, less maintenance and long operation cycle.
Cons:
The adaptability of the operation is poor, and the nature of the gas has a greater impact on the operating performance. The load changes greatly when the unit starts, stops and runs.
(2) The airflow speed is large, and the parts in the flow channel have greater friction loss.
(3) There is surge phenomenon, which is very harmful to the machine.
Scope of application: large and medium flow, medium and low pressure occasions.





