46# High Performance L DAB Lubricant Air Compressor Oil 6000h

46# High Performance L DAB Lubricant Air Compressor Oil 6000h

The role of Bolaite air compressor oil is to form a protective film between the two friction pairs, avoid direct contact between metal and metal, thus cushioning the friction effect, lubrication, reduce wear, so that the normal operation of the machine.If you interested, please contact me in WhatsApp or WeChat 008615837360802. This kind of protective film can be physical adsorption film, or chemical adsorption film or oxidation film, film thickness and strength directly affect lubrication.

Product Introduction

We will continue improving and strengthening the quality management system to ensure that our 1089057554 Pressure Sensor For Atlas Copco, Sotras Replacement Air Filter, 1625 1656 01 meets the highest industry standards. We continue to promote the integration of sustainable development into our corporate strategic planning and business operations, as part of our philosophy of responsibility. The majority of our users can fully experience and share the innovative achievements of scientific and technological development, and establish our excellent products in the industry cards. Adhering to the employment concept of 'people-oriented, stimulating potential, creating value and common development', our company constantly introduces high-end technical talents and is committed to building a market-oriented, professional and efficient team.

Air Compressor Oil 4000hrs

I. Product description

The role of air compressor oil is to form a protective film between the two friction pairs, avoid direct contact between metal and metal, thus cushioning the friction effect, lubrication, reduce wear, so that the normal operation of the machine.

This kind of protective film can be physical adsorption film, or chemical adsorption film or oxidation film, film thickness and strength directly affect lubrication.

II. Product Specification

Brand Name: MENGMA

Place of Origin: China

III. Function

1. Friction reduction and anti-wear: reduce friction resistance to save energy, reduce wear to extend mechanical life and improve economic benefits.

2. Cooling: the friction heat is required to be discharged from the machine at any time.

3. Sealing: it is required to prevent leakage, dust and gas channeling.

4. Clean and disperse: it is required to clean and remove the scale on the friction area.

5. It is required to protect the friction surface from oil deterioration or external erosion.

6. Kinetic energy transmission: hydraulic system, remote control motor and friction stepless speed change.

7. Stress dispersion buffering: dispersing load and relieving impact and shock absorption.

IV. The Oil Replacing Method

Step 1: start up and run to normal temperature for one hour;

Step 2: shut down;

Step 3: drain the oil from the oil tank, cooler and all filters;

Step 4: add the new oil to the minimum oil quantity required for operation (e.g. 1 / 2 volume);

Step 5: start up and run to normal operating temperature for one hour. During this hour, open and close the exhaust valve every 15 minutes to allow the machine to cycle at the highest and lowest pressure valve settings;

Step 6: turn off the machine;

Step 7: drain the oil from cooler, oil tank and all filters;

Step 8: add the new oil to 1 / 2 volume;

Step 9: continue with step 5;

Step 10: shut down;

Step 11: drain the oil from the whole machine, including cooler, oil tank and filter. If necessary, remove the pipe in order to remove the oil from the lower part. Clean the filter screen and replace the separator and all non permanent oil filters. Check whether the inlet filter is covered by contaminated oil and replace it as appropriate;

Step 12: add the recommended oil to the minimum oil required for operation;

Step 13: start and run to normal temperature for 15 minutes;

Step 14: shut down and drain the oil from the machine. Open the filter and filter screen, but do not need to change;

Step 15: add the recommended oil to the normal level of the machine;

Step 16: restart and pay attention to the oil level. When the machine is operating, there will be about 1 / 2 oil in the observation window;

V. Contact Way

Facebook: FILTER ANNA

WeChat/WhatsApp: 008615837360802

We uphold the tradition of independent innovation and the pursuit of excellence, and continue to conduct technological research and development in the field of 46# High Performance L DAB Lubricant Air Compressor Oil 6000h for key user applications. We know that the 21st century will be an era dominated by brand competition and brand competition, brand management is imperative. We effectively enhance the competitiveness, innovation, influence and anti-risk ability of enterprises, and strive to achieve high-quality development!

Hot Tags: MENGMA Air Compressor Oil 4000hours, manufacturers, suppliers, factory, for sale, Hitachi 75HP, Replacement Atlas Copco Oil Filter, Compair Air Filter, 1625 1657 31, Filter 1625 1657 54, Spin-on Oil Separator

Send Inquiry

whatsapp

Phone

E-mail

Inquiry