Sullair air oil separator
Product introduce
Sullair oil separator 88291009-141. It is a built-in oil separator.
The production air compressor filter element has been 15 years, brand complete.Any interest , welcome to inquiry,whatsapp/wechat:8615738660740.
Product specification
Oil contained in compressed is below 3ppM
Service life: 4000h
Initial pressure differential less than 0.02Mpa
Type:air compressor oil separator
Application:Sullair compressor
Material:glassfiber from HV company
Product name:oil separator
Filtration efficiency:99.99%
MOQ:1 Pcs
filtering precision:0.01 micron
Part Number:88291009-141
Function of oil-gas separator
Sullair original oil-gas separator consists of tank body and filter element. The oil-gas mixture from the main engine first strikes the wall of the cylinder to reduce the flow velocity and form large oil droplets. Due to the weight of the droplets themselves, most of them settle to the bottom of the separator. Therefore, the oil-gas separator plays the role of primary separator and oil storage tank. The tank body is equipped with two filter elements, primary filter element and secondary filter element. After primary separation, the oil-gas mixture is finely separated through two filter elements to separate a small amount of lubricating oil remaining in the compressed air and accumulate at the bottom of the filter element. Then, it returns to the air inlet of the main engine through two return pipes and is sucked into the working chamber.
The replacement of the oil-gas separation core is carried out according to the following steps: (1) stop the machine for pressure relief; (2) disassemble the pipeline connected with the top cover and remove the top cover; (3) take out two filter elements and replace them with new ones. Do not peel off the gasket on the flange of the new filter element, and do not remove the metal stud on the gasket. The metal nail has the function of grounding, which can prevent accidents caused by static electricity in the distributor. (4) Clean the inward face of the top cover, then put in a new filter element, tighten the bolts and fix the cover; (5) connect the pipeline connected with the end cover. Two oil return pipes must be inserted at the bottom of the filter element to avoid affecting the oil return.
Hot Tags: sullair air oil separator, manufacturers, suppliers, factory, for sale, 92062132 INGERSOLL RAND SEPARATOR REPLACEMENT, Sotras 5009 Oil Separator Filter, SCR oil separator 25350020 021 replacement, 4930153101, 55173021, LB 13145
