Name: 1629315024 4C/D Air Compressor Precision Filter Element Manufacturers, Suppliers, Factory - Mengma
Brand: Mengma
SKU: 316523091

Air Compressor Precision Filter Element 1629315024 4C/D

202608171555542838582 1

7 1

Product Introduction

This filter element is used in the compressed air purification stage, primarily to intercept and separate oil mist, moisture, and impurity particles from the air stream. Through coalescing filtration, fine oil and water particles merge into larger droplets that are drained away, resulting in compressed air of consistent quality and providing a clean air source for downstream equipment and processes.

Function: Completes oil-water coalescing and separation in compressed air, reducing the impact of contaminants on pneumatic components, instruments, and production equipment.

Technical Specifications

Parameter	Specification
Model Number	4C/D 1629315024
Filtration Method	Coalescing filtration
Filtration Grade	Precision grade
Media Composition	Borosilicate glass fiber composite
Outer Layer	Hydrophobic foam
Support Structure	Stainless steel perforated tube
Seal Material	Fluororubber
Temperature Adaptability	Wide temperature range
Working Pressure	Standard compressed air system pressure
Pressure Drop	Low initial drop; replace upon reaching replacement value
Service Cycle	Determined by actual operating conditions
Oil Compatibility	Mineral and synthetic oils

Product Description

Structural Features

The element is built from multiple bonded layers. The outer hydrophobic foam sleeve blocks coalesced liquids from flowing back while offering oil and acid resistance. The main filtration layer uses ultra-fine borosilicate glass fiber, which provides good hydrophobicity, captures fine particles effectively, and maintains stable airflow. The inner stainless steel perforated tube acts as a structural backbone, preventing media deformation under differential pressure. End caps and seals fit tightly to prevent air bypass or leakage after assembly.

How It Works

Air enters the element and passes through the coalescing layer from inside to outside. Oil mist and water droplets are captured on the fiber surface and gradually merge into larger droplets that settle downward under gravity. The outer hydrophobic structure stops droplets from re-entering the air stream, allowing them to drain properly. Impurity particles are retained within the media. The treated air becomes clean and dry, continuing to the point of use.

Application Scenarios

Suitable for compressed air systems with high air quality requirements:

Electronics manufacturing – prevents oil and particles from affecting components

Food and beverage processing – meets air requirements for product contact and packaging

Pharmaceutical industry – provides clean air for critical processes

Coating and surface treatment – reduces coating defects caused by oil and water

Instrument air – ensures stable operation of control elements and analytical equipment

General industrial pneumatics – extends service life of cylinders, valves, and tools

Installation & Replacement

Before installation, depressurize and isolate the system, clean debris from the housing interior, verify the element matches the housing model, and confirm the seal is correctly positioned. Tighten the end cap to the recommended torque to avoid seal deformation. After assembly, pressurize slowly and check connections for leaks.

During operation, monitor pressure differential changes. Replace the element when the differential reaches the replacement value or when air quality declines. Under clean conditions, replace according to recommended operating hours. Record installation date and running hours to support maintenance planning.

Quality Assurance

Products are manufactured under controlled processes, with material inspection and dimensional verification at key stages. Finished products undergo integrity testing to confirm reliable sealing and media consistency. Batch traceability and material certificates are available.

Packaging & Shipping

Elements are individually protected, packed, and cartoned for export. Customized packaging and labeling available for bulk orders. Lead time depends on order quantity and stock availability.